Beneteau Oceanis 35.1

Construction

• Design made following European Directive requirements and according to CE certification 

• Monolithic hull in polyester 

• Monolithic structural hull liner bonded to the hull 

• Injected deck construction in fiberglass and Saerform foam sandwich, covered with non-slip diamond pattern 

• Hull-deck joint screwed, bonded and trimmed with 1 toerail 

• Cast iron keel fixed with bolts and stainless steel backing plates 

• 2 Underhung rudders with stainless steel stock 

• White hull - Grey metal hull decoration

Deck Equipment

RIGGING 

• Standard mast 9/10 anodized aluminum deck stepped, 2 aft-swept spreaders 

• Anodized aluminum boom 

• Discontinuous stainless steel standing rigging 

• 1 Backstay: Bridle 

• Rigid boom vang 

• Genoa furling system with drum on the deck 

• 2 Genoa tracks with piston adjusted traveller cars 

• 2 Genoa sheet returns stainless steel fairleads 

• Rigging run back to cockpit (except boom topping lift) 

• Complete running rigging: Main halyard, Genoa halyard with clutch on mast and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets, 2 Automatic reefing system lines 

• 4 Clutches, 4 Jamming cleats 

• Mainsail sheet in cockpit bottom (1 Fixed point) 

• 2 Flag halyards 

• Fixed composite arch, with incorporated LED lighting (+ 2 Stand-up blocks for mainsail sheet) 

WINCHES 

• 2 Self-tailing genoa sheet winches (H40.2 STA) 

• 1 Self tailing winch (H35.2 STA) • 1 Aluminum "Speed Grip" winch handle, 1 Winch handle holder 

SAILS 

• Furling genoa with UV protective strip 

• Semi full batten mainsail with slider (with logo) (Roller slides for fully battened mainsail) 

• Lazy Jack 

MOORING - ANCHORING GEAR 

• Self-draining chain locker - Clench bolt - Hatch cover 

• Single bow roller 

• 4 Aluminum mooring cleats - Stainless steel chafing plate 

SAFETY ON DECK 

• 1 Open stainless steel pulpit, 2 Stainless steel aft pushpits 

• 1 Ring lifebuoy bracket 

• Double life lines and stainless steel stanchions 

• Welded ring on pushpit for flag 

COCKPIT 

• Self-bailing cockpit 

• 1 Cockpit locker 

• 2 Lockers in cockpit bottom - Side helm seats 

• 1 Liferaft locker - aft cockipt (0,95 m x 0,59 m x 0,36 m / 3’1’’ x 1’11’’ x 1’2’’) 

• Natural solid wood slatted cockpit benches (1,50 m x 0,50 m / 4’11’’ x 1’8’’) 

• Table with compac top, Hand rail 

• 2 Steering wheel consoles: Stainless steel steering wheels - 800 mm diameter / 2’7’’ - Leather covered - Steering gear at the helm station - Metal cable transmission system - Stainless steel handrail - Navigation instrument pod (optional instruments) - Cup holder 

• 2 Steering compass 

• 2 Deck access points to tiller system 

• 1 Emergency tiller 

• Portside engine control and control panel 

• 2 Hinged PMMA companionway doors - Sliding hatch made of PMMA 

• 1 Swim ladder 

SWIM PLATFORM / AFT TRANSOM (Comfort Trim package) 

• Fully opening transom, convertible into swim platform (2,60 m x 0,70 m / 8’6’’ x 2’4’’) 

• Gas locker strut opening (manual), 1 Stainless steel integrated telescopic swimming ladder 

Interior

• Woodwork Light Oak 

• Rovere Aleve Parquet type laminated floorboards 

• Beige hull liner, in salon and forward cabin 

• Fabric upholstery 

• Mattresses in the cabins, HR35kg/m³ foam 

COMPANIONWAY Headroom: 1,85 m / 6’1’’ 

• GRP salon companionway steps are coated with non-slip surface 

• 1 Leather covered stainless steel handrail 

HANGING LOCKER - PORTSIDE • Beam: 50 cm / 1’8’’ 

SALON - PORTSIDE Headroom: 1,90 m / 6’3’’ 

• L-shaped salon bench seat 

• Storage under bench seats 

• Salon table with one-piece wood top - 2 feet 

• High closed storage units 

• Chart table (with opening top) - Reading light 

• Shelves with fiddles 

• 1 Coachroof panoramic window with curtain 

• 2 Hull portholes with curtain 

• 1 Opening deck hatch with mosquito screen/blind 

• 1 Opening porthole in coaming • LED ceiling lights 

FORWARD CABIN Headroom: 1,80 m / 5’11’’ 

• Central double bed (1,75 m x 2,00 m x 0,45 m / 5’9’’ x 6’7’’ x 1’6’’) 

• 2 Hanging lockers 

• Drawer under the bed 

• 1 Opening deck hatch with fan, mosquito screen/blind 

• 2 Hull portholes with curtain 

• 2 Reading lights

LENGTHWAYS GALLEY COUNTER - STARBOARD Headroom: 1,90 m / 6’3’’ 

• Compact Clay laminated worktop 

• 1 Stainless steel sink - 1 Rectangular stainless steel basin - 1 mixing tap hot/cold water 

• 1 2 Burner stainless steel gas cooktop on gimbaled mounts 

• Unit (Drawer & Cupboard units) 

• Front opening refrigerator (12 V - 130 L / 34 US Gal) 

• Cubby hole locker, Garbage bin 

• 1 Coachroof panoramic window with curtain 

2 CABIN LAYOUT Starboard aft: Interior stowage space Headroom: 1,75 m / 5’9’’ 

• Direct access from the salon 

• Allows direct access to the cockpit locker Port aft: 1 cabin Headroom: 1,75 m / 5’9’’ 

• Dimensions - Berths: 1,73 m x 1,98 m / 5’8’’ x 6’6’’ 

• 1 Overhead light, 1 Reading light 

• Open shelving 

• Padded upholstery along the hull 

• 1 Wooden hanging locker 

• Deck house opening porthole 

Aft starboard head compartment Headroom: 1,90 m / 6’31’’ 

• Access through salon 

• 1 Washbasin, 1 Mixing tap hot/cold water, Shower 

• 1 Electric flush marine toilet with 80 L / 21 US Gal rigid reserve 

• Cabinet, 1 Mirror, Toilet accessories, Hook 

• 1 Overhead light 

• 1 Opening portlight with curtains in the coachroof side window 

Engine Notes

1 x 30hp YANMAR inboard diesel engine

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.