img12214Marine Composite approached us to design a new IMS 42 to be series built , in limited numbers, according to the IMS rule version 2004 and IMS 600.

img12213This is an evolution of my previous design Sea Winner 46, designed for the same yard which is based in Italy near San Remo in Andora. We decided to go the bottom of the range of the GPH, allowed to be eligible as IMS 600, so we went to 586 sec/mile GPM. We worked a lot within CFD and VPP analysis on the hull form; we created a long (LOA 12.65 metres) and narrow (Max. Beam 3.25 metres) canoe body with U sections.

img12212The rig supports a large sailplan that enables the boat to be fast in light to medium winds, the normal condition in the Mediterranean sea. The construction is from female moulds for hull and deck using prepreg from SP Systems in E glass and reinforcement in carbon fibre up to achieve a light, strong and durable boat. The appendages were designed with extensive CFD (computer fluid dynamic) testing, to obtain as thick foil as requested by the IMS rule, but with a low drag and high lift . The keel is built with a CNC milling machine from a cast of lead (bottom) and (top) iron.

img12211With a different keel with torpedo in lead and blade in iron of different design , and
with a masthead spinnaker the boat will perfom well also in IRC.

The rudder is characterized by an high aspect ratio with the blade and the stock,
built in carbon fibre pre-preg by ISOTOP in France.

But the Sea Winner 42 is not only a racing boat, it would be good also for cruising,
the interiors will have a cabin height of 1.90 metres, 3 cabins, 1
toilet etc.

The basic cost on the boat complete with mast in carbon fibre will be
lower than a one off boat, but with the same standard of finish.

A real racing machine suitable to be used in cruising for a long term!

Please contact us to sail with Sea Winner 42 , this European summer.

For more information please contact the designer Giovanni Ceccarelli or the builder
Mr. Mengarelli +39 347 4372442 or Mr. Urbinati +39 335 6360176.

Name :Sea Winner 42
Designer :Ceccarelli Yacht Design
Builder :Marine Composite
LOA :12.65 Mt.
Bmax :3.25 Mt.
Draft :2.55 Mt.
Dspl light :6500 kg.
Ballast Keel :3000 kg.
Sail Area Upwind :102 m2
Sail Area Downwind :180 m2
Engine :Yanmar Cv 29 S drive
Crew Max :10
Measurement :IMS + IMS 600 or IRC

For more info or detail please contact
Designer : Ceccarelli Yacht Design
Via Ignazio Sarti 7 ? 48100 Ravenna
Tel. +39 0544212460
Fax +39 054437439
Email [email protected]
ceccarelliyachtdesign.com

Builder : Marine Composite Srl
Via Divizia , 5 - Andora ( SV)
Tel. 011-9682195
Fax 011-9663314
www.marinecomposite.it
Email [email protected]