Mako 214 Center Console

Additional Specs

Length:21' 5" Beam: 8' 6" Bottom Width: 6' 7.5" Max. Recommended HP: 250 HP Fuel Capacity: 91 gal. Max. Person Capacity: 10 persons Max. Person Weight: 1700 lbs. Max. Person, Motor & Gear Weight: 2550 lbs. Interior Depth: 27" Transom Height At Center Line: 25" Deadrise: 18 degrees Draft: 14" Average Dry Weight: 3735 lbs. Average Hull Weight: 3100 lbs. Average Package Weight: 4535 lbs. Package Height: 9' 3" Package Height w/T-top or Hardtop: 11' 2" Storage Length: 30' 8"

Standard Features

Certification & Safety Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats NMMA® certified Factory leak tested for hull, plumbing & fitting integrity Horn Flush-mounted Ritchie Navigation® Voyager compass   Console Stainless steel steering wheel w/knob Tilt hydraulic steering Binnacle-mounted motor control(s) Mercury® SmartCraft® digital gauges Heavy-duty electrical switching system w/battery selector switch(es) Switch panel w/manual reset circuit breakers & illuminated switches Easy access to helm electronics, instruments & switches FUSION stereo w/4 speakers Removable forward-console seat w/70-qt. (66.24 L) insulated, drained cooler Integrated full-width footrest Acrylic windscreen Marine-grade tinned wiring w/submersible connectors Lockable, sealed glovebox Extra-large electronics mounting surface 2 console drink holders 12V DC outlet   Leaning Post Powdercoated aluminum leaning post Helm seat w/flip-up cushion Storage below seat Space below leaning post for optional cooler Rod holders   Top Outrigger-ready canvas T-top w/4 rod holders, electronics box w/mounting plates for antenna & spreader lights .25" (6.35 mm) aluminum backing-plate reinforcement for T-top   Head Head enclosure/storage space w/stainless steel latch Wiring access hatch & battery access Main distribution panel inside head Courtesy light   Interior Anchor locker Foredeck dodger mounting boss 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage Forward cushions w/removable backrests 210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket Low-profile powdercoated aluminum bow rails 2 gunnel-mounted rod holders Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long Aft stern seating w/folding center backrest Molded non-skid surfaces throughout Raw water outlet Bilge access hatch 360° coaming bolsters Five 6" (15.24 cm) polished marine-grade stainless steel cleats 2 stainless steel bow chocks   Performance Legendary dry-riding MAKO® hull Aggressive deep V hull design Performance lifting strakes Recessed electric trim tabs Factory-matched stainless steel propeller   Construction & Exterior Color: MAKO® Bone White gelcoat 100% composite construction Coosa® Bluewater 100% composite transom core Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish Closed-cell foam-injected stringer grid for USCG-approved flotation Heavy-duty rub rail w/stainless steel insert Premium marine-grade stainless steel hardware & fasteners for corrosion resistance Stipple texture to B-side of all fiberglass lids Closed-molded hatch covers w/finished undersides & integrated gaskets Aluminum backing plates for cleats & chocks Swim platform w/3-step stainless steel ladder   Electrical, Mechanical & Plumbing System High-speed raw water intake USCG-compliant navigation lights Interior courtesy lights 2 cockpit courtesy lights & 1 head light Dual battery rigging TRACKER® Lithium WRM100HP/31 cranking battery Heavy-duty electrical switching system Marelon® corrosion-free seacocks on all below-water thru-hull fittings Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment   Optional Trailer OPTIONAL tandem-axle EZ Loader® aluminum trailer available NMMA® certified DOT approved Stainless steel hardware Galvanized steel components Tandem-axle brakes 14" (35.56 cm) radial tires w/galvanized V5 wheels Oil bath hubs Leaf spring suspension Heavy-duty winch w/nylon strap & safety strap LED lighting PVC loading guides  

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.

Default Title

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.