Crevalle 24 HCO

Manufacturer Provided Description

The 24 HCO is designed with the family and the fisherman in mind. 

We keep the family in mind by including:

• one removable 65-quart and one 72-quart cooler
• in-console porta potty
• forward seating package
• removable ski pylon

And, when it comes to fishing, we added features you wanted most:

• two 28-gallon release wells
• one bait well
• lockable rod storage for 10 rods
• dedicated anchor storage
• in-deck, cast-net storage

Hull and Deck

• No wood construction
• Epoxy coated fuel tanks
• CRIMP- Crevalle Resin Infused Manufacturing Process
• 10 Year Transferable Hull Warranty
• Black or white rub rail with Stainless Steel Insert
• Composite Transom
• Dedicated Anchor Locker
• Position Control Hinges on all Hatches
• Fiberglass Hatches Finished on both sides
• NMMA Certified using ABYC Standards
• Self Bailing cockpit
• Forged Stainless Steel thru hulls with duckbill valves & ball valves
• Integrated swim platform with 3-step fold-out stainless swim ladder
• Standard 6” Engine Jack Plate combined with notched transom allows our boats to leap on plane in shallow water (Jack Plate all the way up) with no propeller cavitation.
• Marelon Seacocks (Composite material, no corrosion or electrolysis)
• Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
• Hidden deck drains with stainless covers and duckbill valves
• Welded one piece stern eyes
• Deep cockpit for a safe dry ride
• Yacht Grip, non-skid deck
• Setback transom provides full aft deck
• Under gunwale rod storage for (3) 8′ rods each side
• Forward rod storage with room for (10) 7′-6″ rods 
• 40″ wide flip up aft seat on centerline for safety
• Bow Dry storage
• One Removable 65-quart & one 72-quart coolers
• (8) Standard in gunwale Rod Holders
• (6) Custom Crevalle pull-up cleats
• (8) Standard cup holders
• Port and Starboard in-gunwale safety gear storage
• Digital Engine Gauges
• Floor storage for 5 Gallon Bucket
• Custom fiberglass leaning post with backrest, rigging tray, tackle storage, sink, glove boxes, removable cooler, cup holders & rod holders. 
• Unobstructed aft fishing deck
• Pre wired 8 AWG wiring for trolling motor
• Trolling motor plug panel
• Forward grab rails 
• Fresh water transom shower
• Fuel water separator
• Wet Sounds speakers
• Bilge pump and high water bilge pump

Release Wells (2)

• Insulated 28 Gallon aft release wells
• Venturi aeration bubbler
• Dual jets
• Protected overflow stand pipe
• Commercial aquarium type aeration
• Blue gel coat
• 800 gph, aeration pumps
• LED lighting
• Intake plumbing that prevents water levels from dropping while at speed

Bait Well (1)

• Adjustable aeration jet can be closed to convert bait well into fully insulated cooler
• Wide opening for cast net use
• Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait
• Blue gel coat
• Gasketed live well lids

Helm

• Your choice colored gelcoat helm face to eliminate secondary glare
• Space for a 12” GPS Multifunction Display, VHF and Stereo
• Deluxe stainless steering wheel with power knob
• Integrated, dual height, nonskid foot rests
• Welded 316 stainless steel console grab rail
• Compass
• Single note stainless horn
• Digital engine gauges
• Portside helm door
• Backlit gauge panel
• Console door with trash bag holder
• Individual circuit breakers
• LED lighting inside storage
• Bluetooth ready stereo
• Integrated engine data on electronics options
• Hydraulic or electronic steering with tilt helm
• Helm panel with lighted push button switches

Technical Standards

• Tinned copper wiring
• LED cockpit lighting throughout, blue or white selectable
• Deutsch water resistant plugs on harnesses
• Sealed Bussbars
• Heat shrunk electrical terminals
• Circuit breakers (not fuses)
• 8 AWG trolling motor harness
• Battery switch with parallel and automatic charge relay on helm
• LED Navigation lights
• Deluxe battery hold down trays

Upholstery

• Custom upholstery with contoured seating and cushions
• Tone on Tone color accents, top stitching, heat reflective vinyls and multi density foam.
• Leaning post with flip-up bolsters

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.