Bronsveen Spitsgatkotter 14.98

This robust and sturdy Bronsveen Spitsgatkotter 14.98 was built by Bronsveen Jachtbouw Nederland. A characterful ship with wide side decks, a large foredeck, and a spacious, round cockpit. The ship is suitable for those looking for living space and comfort on board. Thanks to its layout and finish, this cutter is particularly suitable for permanent residence or a long stay on board. The ship is a young trawler, light and modern in design, and equipped with sleek interior finishing. The living spaces are generously sized and offer plenty of daylight, even in the forepeak thanks to the portholes. The headroom on board is approximately 2.05 meters. The layout is as follows: wheelhouse with salon, in the aft are the galley and dinette, and in the fore are three cabins and a spacious bathroom located in the bow. Due to this practical and spacious setup, the ship is extremely suitable as a floating residence. The underwater hull is built from 8 mm steel with a 10 mm keel plate. Above the waterline, the hull is made of 5 mm steel. The paint system needs attention. The ship is currently CE-B classified but can be certified CE-A with the addition of 2 tons of ballast. The air draft is approximately 3.75 meters. The cutter has a large hydraulic tank and is prepared for the connection of a crane on the foredeck or a stern thruster. The high bulwark with sturdy handrails ensures safety on deck. The Bronsveen Spitsgatkotter 14.98 - Orion One is equipped with a new Victron Quattro II Inverter, new refrigerator, and new washing machine, a Victron Energy monitor. It is a ship with an authentic appearance and comfort, built for those seeking independence, space, and quality on the water. For questions or a viewing, you are welcome at Elburg Yachting 7 days a week.